Plastic Products Catalog

BMP Medical is a quality manufacturer of plastic consumables and plastic products for research and medical diagnostic laboratories. Our products are manufactured to the highest quality standards. We offer a wide selection of products sold through the world’s premier laboratory distributors.

Non-Sterile and Sterile Centrifuge Bottles

  • Available with standard caps for low-speed work and sealing caps for high-speed applications
  • Caps have a built-in gripper to facilitate removal from the rotor
  • Extra thick walls for durability-resistant to most chemicals
  • Wide mouth design makes filling and decanting easier

These precision molded centrifuge bottles are available in polycarbonate or polypropylene. For low speed applications the bottles provide excellent value for large volume/large batch centrifugation procedures. For high-speed work, the easy-to-use Noryl® (Noryl® is a registered trademark of General Electric Company) sealing caps with silicone O-rings enable leak-free processing at high centrifugal forces over long durations. Bottles must be filled to 80% of capacity.Centrifuge bottles may be autoclaved at 121ºC at 15 psi for 20 minutes. Caps should be placed on the bottles without engaging the threads. Bottles are qualified to the rated g-forces using Sorvall® (Sorvall® is a registered trademark of Kendro Laboratory Products) and Fiberlite® (Fiberlite® is a registered trademark of Piramoon Technologies Inc.) high-speed rotors, tested at 20ºC, with bottles filled to 80% of capacity.Failure to use the correct rotor cushion or adapter will shorten the life of the bottle and may prevent achievement of the maximum rated RCF and/or bottle failure.Prolonged autoclaving and reuse may cause stress cracks, crazing or bottle discoloration.

 

Cytology Funnels Category

BMP Medical Cytology Funnels for the Shandon CytoSpin® Centrifuge BMP Medical Cytology Funnels are the functional equivalent of the Thermo Shandon CytoFunnel®. Fully compatible with the Shandon CytoSpin Centrifuge, BMP Medical Cytology Funnels can be used to deposit a thin layer of cells in a clearly defined area of a microscope slide. The filter card absorbs any excess fluid. Operation is identical to those supplied by Shandon and easy-to-follow instructions are included in each pack. All products sold in case quantities only.


 

Hemodrop Blood Dispenser

The Hemodrop is designed to reduce the risk of exposure to bloodborne pathogens in the Hematology laboratory. To prepare a manual differential smear, a drop of blood needs to be dispensed onto a glass slide from the specimen tube. Simply puncture the rubber stopper with the Hemodrop, and then invert and press gently onto the slide. A single drop of blood will be dispensed and the slide is ready. No more removing the stopper and manually putting a drop on the slide to test blood. 

Multipurpose Containers

These high-quality non-graduated lab containers are designed for the collection, transport, and storage of specimens and samples. Tight fitting lids prevent leaks and odors. Ideal for storing biologically hazardous samples for terminal autoclaving before disposal. Molded from various materials. The stackable containers are resistant to freezing and boiling.

 

Polypropylene Beakers

Polypropylene Beakers are resistant to most commonly used laboratory reagents, including a variety of strong acids, bases, and organic solvents, these high quality polypropylene beakers are the premier choice for scientific laboratory applications. All beakers are transparent for clear content visibility and graduated for easily estimating volumes. Molded-in pouring spouts, and a rolled lip, for a dripless working environment. Autoclavable to 121ºC ( 248ºF).

Specimen Collection

For specimen collection and transport, this system provides disposable products for the convenient collection, delivery, and testing of urine specimens. A plastic cup is provided for specimen collection and the pressure sensitive patient identification labels have ample writing space. The lightweight transport rack is small and easy to carry yet provides space for up to 20 tubes with labels and caps. The tubes are made of sturdy polystyrene and are safe for centrifuging. The flared top permits the use of a midget urinometer ensuring a tight cap fit.  

 

Tissue & Ultra Tissue Grinders

We offer two lines of tissue grinders for the clinical lab and research lab. The standard product is all plastic and is designed to grind softer tissues such as liver and spleen. The Ultra tissue grinder line has a vitrified tip and is designed for tougher material such as muscle or bone. Both lines are delivered sterile sealed Tyvek® (Tyvek® is a registered trademark of DuPont) package.

Urine Sedimentation System

BMP Medical, a manufacturer of diagnostic products, has a full line of urinalysis disposables. We offer the components separately, or in various kit sizes and configurations. The line is built around our 10-chambered Decislide which is made out of optically clear acrylic. It can take 10 individual samples on the same slide eliminating the need for a new slide for each sample.

 

BMP Medical announces Michael Carignan as Programs and Engineering Manager

November 16, 2022

BMP Medical is pleased to announce the appointment of Michael Carignan as Programs and Engineering Manager for BMP Medical.

BMP Medical announces Michael Carignan as Programs and Engineering ManagerMichael joined BMP Medical at its Sterling, Massachusetts plastic manufacturing hub facility, recently, as Programs and Engineering Manager. Prior to joining us, he was President of Wachusett Precision Tool, Inc. for five plus years, which he sold in 2022. Before that, he held Senior Engineering, Program Management, Director of Sales, as well as Business Development positions at formerly Nypro Healthcare Inc. (now Jabil) during his eighteen plus years with the company.

As a native to the New England area, Michael brings to his new position over thirty-three years of experience working across a large array of areas within the plastic manufacturing industry. He has been a part of several innovative programs for the healthcare and packaging industries that have helped to enhance everyday lives.

Michael Faulkner, CEO and President of BMP Medical, commented, “Michael Carignan brings a wealth of experience and knowledge to this important position, and has a successful background in the plastics industry. His experience in growing businesses and delivering excellent customer experience for demanding medical programs is second to none.

His appointment reflects BMP Medicals’ ambition to further develop and enhance programs and engineering solutions for our global customers. The appointment of Michael’s new position is all part of our continued commitment to deliver the highest level of quality for our strategic customers. On behalf of the BMP Medical team, I am delighted to welcome Michael to his new role.

In addition, I want to thank the exceptional involvement of our employees, that never stop working to drive the innovation that is crucial to the healthcare industry.”

Michael Carignan, Programs and Engineering Manager of BMP Medical commented, “Custom plastic contract manufacturer BMP Medical is a well-known family-owned business that I have worked with for over six years as a supplier, before joining the team full time. The company has a strong foundation of talented people and additional facility square footage with considerable opportunity for future growth. I’m happy to part of the BMP Medical team!”

About BMP Medical
BMP Medical provides plastic contract manufacturing services to leading medical device and diagnostic customers in need of injection molding and injection-blow molding. BMP Medical’s 80,000 sq. ft. facility is headquartered in Sterling, Massachusetts. BMP Medical is a global contract manufacturer servicing the Medical Device and Medical Diagnostic markets in all areas, including, but not limited to, IVD, IV access, sample-preparation devices, and lateral-flow technologies. BMP Medical can service our partner requirements on a worldwide basis. Certifications: ISO13485:2016; FDA registration #1220502; ISO Class 8 injection molding; ISO Class 8 assembly & packaging; 21 CFR 820 Quality System Regulation; and FDA registered. Services Offered: Class 7 Assembly, Clean Room Manufacturing (Class 8), Clean Room Packaging and Assembly (Class 8), Custom Assembly & Packaging, Custom Injection Blow Molding (IBM), Custom Injection Molding, DNase- and RNase-free manufacturing, FDA Registered Facility, Product design & development services, R&D tooling, and Sterilization services.

READY TO GET STARTED?

    Archives

    Categories