Plastic Products Catalog

BMP Medical is a quality manufacturer of plastic consumables and plastic products for research and medical diagnostic laboratories. Our products are manufactured to the highest quality standards. We offer a wide selection of products sold through the world’s premier laboratory distributors.

Non-Sterile and Sterile Centrifuge Bottles

  • Available with standard caps for low-speed work and sealing caps for high-speed applications
  • Caps have a built-in gripper to facilitate removal from the rotor
  • Extra thick walls for durability-resistant to most chemicals
  • Wide mouth design makes filling and decanting easier

These precision molded centrifuge bottles are available in polycarbonate or polypropylene. For low speed applications the bottles provide excellent value for large volume/large batch centrifugation procedures. For high-speed work, the easy-to-use Noryl® (Noryl® is a registered trademark of General Electric Company) sealing caps with silicone O-rings enable leak-free processing at high centrifugal forces over long durations. Bottles must be filled to 80% of capacity.Centrifuge bottles may be autoclaved at 121ºC at 15 psi for 20 minutes. Caps should be placed on the bottles without engaging the threads. Bottles are qualified to the rated g-forces using Sorvall® (Sorvall® is a registered trademark of Kendro Laboratory Products) and Fiberlite® (Fiberlite® is a registered trademark of Piramoon Technologies Inc.) high-speed rotors, tested at 20ºC, with bottles filled to 80% of capacity.Failure to use the correct rotor cushion or adapter will shorten the life of the bottle and may prevent achievement of the maximum rated RCF and/or bottle failure.Prolonged autoclaving and reuse may cause stress cracks, crazing or bottle discoloration.


Cytology Funnels Category

BMP Medical Cytology Funnels for the Shandon CytoSpin® Centrifuge BMP Medical Cytology Funnels are the functional equivalent of the Thermo Shandon CytoFunnel®. Fully compatible with the Shandon CytoSpin Centrifuge, BMP Medical Cytology Funnels can be used to deposit a thin layer of cells in a clearly defined area of a microscope slide. The filter card absorbs any excess fluid. Operation is identical to those supplied by Shandon and easy-to-follow instructions are included in each pack. All products sold in case quantities only.


Hemodrop Blood Dispenser

The Hemodrop is designed to reduce the risk of exposure to bloodborne pathogens in the Hematology laboratory. To prepare a manual differential smear, a drop of blood needs to be dispensed onto a glass slide from the specimen tube. Simply puncture the rubber stopper with the Hemodrop, and then invert and press gently onto the slide. A single drop of blood will be dispensed and the slide is ready. No more removing the stopper and manually putting a drop on the slide to test blood. 

Multipurpose Containers

These high-quality non-graduated lab containers are designed for the collection, transport, and storage of specimens and samples. Tight fitting lids prevent leaks and odors. Ideal for storing biologically hazardous samples for terminal autoclaving before disposal. Molded from various materials. The stackable containers are resistant to freezing and boiling.


Polypropylene Beakers

Polypropylene Beakers are resistant to most commonly used laboratory reagents, including a variety of strong acids, bases, and organic solvents, these high quality polypropylene beakers are the premier choice for scientific laboratory applications. All beakers are transparent for clear content visibility and graduated for easily estimating volumes. Molded-in pouring spouts, and a rolled lip, for a dripless working environment. Autoclavable to 121ºC ( 248ºF).

Specimen Collection

For specimen collection and transport, this system provides disposable products for the convenient collection, delivery, and testing of urine specimens. A plastic cup is provided for specimen collection and the pressure sensitive patient identification labels have ample writing space. The lightweight transport rack is small and easy to carry yet provides space for up to 20 tubes with labels and caps. The tubes are made of sturdy polystyrene and are safe for centrifuging. The flared top permits the use of a midget urinometer ensuring a tight cap fit.  


Tissue & Ultra Tissue Grinders

We offer two lines of tissue grinders for the clinical lab and research lab. The standard product is all plastic and is designed to grind softer tissues such as liver and spleen. The Ultra tissue grinder line has a vitrified tip and is designed for tougher material such as muscle or bone. Both lines are delivered sterile sealed Tyvek® (Tyvek® is a registered trademark of DuPont) package.

Urine Sedimentation System

BMP Medical, a manufacturer of diagnostic products, has a full line of urinalysis disposables. We offer the components separately, or in various kit sizes and configurations. The line is built around our 10-chambered Decislide which is made out of optically clear acrylic. It can take 10 individual samples on the same slide eliminating the need for a new slide for each sample.


Developing Research and Medical Diagnostic Products

Medical DiagnosticsThe demand for research and medical diagnostic products grows annually. Because medical diagnostic devices are used in the testing, treatment, prevention, monitoring, studying, and diagnosis of diseases and other biological human conditions, companies that develop and manufacture such diagnostic products are well positioned to serve an important and vital role in health and healthcare, the biological sciences, and all medical-related disciplines and industries. Combined with the ever-expanding field of material sciences in plastics, along with technological innovation and advancement moving ahead at a rapid pace, engineers and device manufacturers are making great strides in the development of diagnostic products.

Innovation in Medical Diagnostic Device Development
Nevertheless, great care must be made when a diagnostic device is brought to market. It is an end result of a lengthy, multi-step process that includes material, time and financial investment—not only in research and development, design, and manufacturing, but the entire process of verification and validation, regulatory approval, and market placement that comprises each stage of the product life-cycle. From conception to finished commercial products, medical devices require innovative engineers and product designers, experienced project managers, quality control experts, and substantial regulatory expertise to make that transition a successful one.

A successful and quite common practice for companies, inventors and entrepreneurs to bring their device to market is through contracting Original Equipment Manufacturers (OEM) of medical devices. Contract manufacturing of medical devices is the system by which a manufacturing company makes medical devices or components of medical devices that are later sold by another company. Effective manufacturing systems can also offer areas of expertise in engineering, design, molding, assembly, and R&D, and range in capabilities from prototype to long production runs.

Particularly with the medical device market, OEMs must provide specialized facilities for manufacturing such products, and have on-site medical labs for all stages of production, from concept to design to manufacturing. Labs give engineers the opportunity to validate and verify new products, plus allow for modification or change in design as needed.

How Can an OEM Contract Manufacturer Benefit Your Company?
As an OEM contract manufacturer, Biomedical Polymers, Inc., provides all such services for the medical device industry. The company stands at the forefront in meeting the demand of research and medical diagnostic products and is part of a greater medical plastic engineering community that serves the research, biomedical, and medical diagnostic laboratory markets that manufactures a variety of diagnostic products for research and medical laboratories worldwide.

BMP, not only contract manufactures private labeled products for distribution but has its own line of products, too. As an OEM of plastic consumables and plastic products for research and medical diagnostic laboratories, BMP products are produced to the highest quality standards. Our engineers offer over three decades of expertise with a focus on new trends and technologies in the field of plastic materials including polycarbonate, polypropylene, polyethylene, and thermoplastics, or custom formulate polymers to meet specific application needs. State-of-the-art plastic injection molding capabilities provide sterile, high-quality medical devices that serve clinical laboratories and research labs. Design consultation, engineering, drawing, R&D, tooling, mold development, computer automation, and statistical process control for mid-tier products are all onsite. The BMP facility is also equipped with a Class 8 clean room for manufacturing, packaging, and assembly needs and meets all regulatory requirements for medical device engineering.

As the development of research and medical diagnostic products continues to expand worldwide, you’ll find in Biomedical Polymers a global manufacturer that specializes in the custom manufacture of both disposable and reusable small-to-medium plastic parts for research, biomedical, and medical diagnostic laboratories everywhere.