BMP Medical expansion of Sterling, Massachusetts Custom Plastic Manufacturing Facility

BMP Medical ExpansionSterling, Mass.– BMP Medical announced today that it is expanding within its Sterling, Massachusetts facility. The 25,000 sq. ft. expansion will benefit customers by providing additional warehouse space for growing inventory needs, which will accelerate time to market. Previously, this space was occupied by a tenant. This is all part of a long-term strategic plan to address future growth. The total 80,000 sq. ft. facility offers: Class 7 Assembly, Clean Room Manufacturing (Class 8), Clean Room Packaging and Assembly (Class 8), Custom Assembly & Packaging, Custom Injection Blow Molding (IBM), Custom Injection Molding, DNase- and RNase-free manufacturing, FDA Registered Facility, Product Design & Development Services, R&D Tooling, and Sterilization Services.

This all sits on the doorsteps of their 45-year anniversary as they look back on how fortunate they have been to have long-term customers that grow and continue to grow with them. BMP Medical is a global contract manufacturer servicing the Medical Device and Medical Diagnostic markets in all areas, including, but not limited to, IVD, IV access, sample preparation devices, and lateral-flow technologies.

Michael Faulkner, CEO and President of BMP Medical, commented, “When we purchased the new facility in 2018, it was with the understanding that we would require that space down the road as part of our strategic growth plan. Customers will benefit from our larger warehouse capacities as well as the extra drying hoppers we purchased for resins. The facility allows for BMP Medical, our existing customers, and future customers to experience continued growth.”

 About BMP Medical

BMP Medical provides plastic contract manufacturing services to leading medical device and diagnostic customers in need of injection molding and injection-blow molding. BMP Medical’s 80,000 sq. ft. facility is headquartered in Sterling, Massachusetts. BMP Medical is a global contract manufacturer servicing the Medical Device and Medical Diagnostic markets in all areas, including, but not limited to, IVD, IV access, sample-preparation devices, and lateral-flow technologies. BMP Medical can service our partner requirements on a worldwide basis. Certifications: ISO13485:2016; FDA registration #1220502; ISO Class 8 injection molding; ISO Class 8 assembly & packaging; 21 CFR 820 Quality System Regulation; and FDA registered. Services Offered: Class 7 Assembly, Clean Room Manufacturing (Class 8), Clean Room Packaging and Assembly (Class 8), Custom Assembly & Packaging, Custom Injection Blow Molding (IBM), Custom Injection Molding, DNase- and RNase-free manufacturing, FDA Registered Facility, Product design & development services, R&D tooling, and Sterilization services.

READY TO GET STARTED?

    Archives

    Categories

    Plastic Products Catalog

    BMP Medical is a quality manufacturer of plastic consumables and plastic products for research and medical diagnostic laboratories. Our products are manufactured to the highest quality standards. We offer a wide selection of products sold through the world’s premier laboratory distributors.

    Non-Sterile and Sterile Centrifuge Bottles

    • Available with standard caps for low-speed work and sealing caps for high-speed applications
    • Caps have a built-in gripper to facilitate removal from the rotor
    • Extra thick walls for durability-resistant to most chemicals
    • Wide mouth design makes filling and decanting easier
    These precision molded centrifuge bottles are available in polycarbonate or polypropylene. For low speed applications the bottles provide excellent value for large volume/large batch centrifugation procedures. For high-speed work, the easy-to-use Noryl® (Noryl® is a registered trademark of General Electric Company) sealing caps with silicone O-rings enable leak-free processing at high centrifugal forces over long durations. Bottles must be filled to 80% of capacity. Centrifuge bottles may be autoclaved at 121ºC at 15 psi for 20 minutes. Caps should be placed on the bottles without engaging the threads. Bottles are qualified to the rated g-forces using Sorvall® (Sorvall® is a registered trademark of Kendro Laboratory Products) and Fiberlite® (Fiberlite® is a registered trademark of Piramoon Technologies Inc.) high-speed rotors, tested at 20ºC, with bottles filled to 80% of capacity. Failure to use the correct rotor cushion or adapter will shorten the life of the bottle and may prevent achievement of the maximum rated RCF and/or bottle failure. Prolonged autoclaving and reuse may cause stress cracks, crazing or bottle discoloration.
    centrifuge bottle
    Sterile Centrifuge Bottles 
     
    centrifuge bottle
    Non-sterile Centrifuge Bottles

    Cytology Funnels Category

    BMP Medical Cytology Funnels for the Shandon CytoSpin® Centrifuge BMP Medical Cytology Funnels are the functional equivalent of the Thermo Shandon CytoFunnel®. Fully compatible with the Shandon CytoSpin Centrifuge, BMP Medical Cytology Funnels can be used to deposit a thin layer of cells in a clearly defined area of a microscope slide. The filter card absorbs any excess fluid. Operation is identical to those supplied by Shandon and easy-to-follow instructions are included in each pack. All products sold in case quantities only.


     

    metal cytology funnel clip

    Metal Cytology
    Funnel Clips

    Double Cytology Funnels

    Double Cytology Funnels

    Single Cytology Funnels

    Single Cytology Funnels

    Hemodrop Blood Dispenser

    The Hemodrop is designed to reduce the risk of exposure to bloodborne pathogens in the Hematology laboratory. To prepare a manual differential smear, a drop of blood needs to be dispensed onto a glass slide from the specimen tube. Simply puncture the rubber stopper with the Hemodrop, and then invert and press gently onto the slide. A single drop of blood will be dispensed and the slide is ready. No more removing the stopper and manually putting a drop on the slide to test blood.  
    hemodrop
    Hemodrop

    Multipurpose Containers

    These high-quality non-graduated lab containers are designed for the collection, transport, and storage of specimens and samples. Tight fitting lids prevent leaks and odors. Ideal for storing biologically hazardous samples for terminal autoclaving before disposal. Molded from various materials. The stackable containers are resistant to freezing and boiling.

    centrifuge

    Translucent Multipurpose
    Containers

     

    Polypropylene Beakers

    Polypropylene Beakers are resistant to most commonly used laboratory reagents, including a variety of strong acids, bases, and organic solvents, these high quality polypropylene beakers are the premier choice for scientific laboratory applications. All beakers are transparent for clear content visibility and graduated for easily estimating volumes. Molded-in pouring spouts, and a rolled lip, for a dripless working environment. Autoclavable to 121ºC ( 248ºF).
    centrifuge
    Polypropylene Beaker

    Specimen Collection

    For specimen collection and transport, this system provides disposable products for the convenient collection, delivery, and testing of urine specimens. A plastic cup is provided for specimen collection and the pressure sensitive patient identification labels have ample writing space. The lightweight transport rack is small and easy to carry yet provides space for up to 20 tubes with labels and caps. The tubes are made of sturdy polystyrene and are safe for centrifuging. The flared top permits the use of a midget urinometer ensuring a tight cap fit.   
    centrifuge
    Specimen Collection Kit
     

    Tissue & Ultra Tissue Grinders

    We offer two lines of tissue grinders for the clinical lab and research lab. The standard product is all plastic and is designed to grind softer tissues such as liver and spleen. The Ultra tissue grinder line has a vitrified tip and is designed for tougher material such as muscle or bone. Both lines are delivered sterile sealed Tyvek® (Tyvek® is a registered trademark of DuPont) package.

    tissue grinder

    Tissue Grinders

    ultra tissue grinder

    Ultra Tissue
    Grinders

    Urine Sedimentation System

    BMP Medical, a manufacturer of diagnostic products, has a full line of urinalysis disposables. We offer the components separately, or in various kit sizes and configurations. The line is built around our 10-chambered Decislide which is made out of optically clear acrylic. It can take 10 individual samples on the same slide eliminating the need for a new slide for each sample.

     

    Urine Sedimentation

    Urine Sedimentation
    System