News & Events

News and Events

BMP to Sponsor and Attend MPO Summit 2019

BMP to Sponsor and Attend MPO Summit 2019

As an OEM injection molding and injection blow molding medical device manufacturer, BMP Medical will be sponsoring and attending the MPO Summit 2018 event at the Marriott San Francisco Waterfront Hotel. This MedTech event focuses on medical device manufacturing,...

Developing Research and Medical Diagnostic Products

Developing Research and Medical Diagnostic Products

The demand for research and medical diagnostic products grows annually. Because medical diagnostic devices are used in the testing, treatment, prevention, monitoring, studying, and diagnosis of diseases and other biological human conditions, companies that develop and...

Schedule a Visit at Our New Manufacturing Facility

Schedule a Visit at Our New Manufacturing Facility

Private tours are being scheduled for potential medical and diagnostic OEM manufacturing partners of interest throughout 2019. The plastic contract manufacturing facility will serve as a hub for making BMP Medical's full range of manufacturing services available to...

What’s the Difference Between Blow Molding and Injection Molding?

What’s the Difference Between Blow Molding and Injection Molding?

Injection blow molding and plastic injection molding have an important role in the custom manufacturing of reusable and disposable plastic parts that are used worldwide in the research and biomedical fields, and in medical diagnostic laboratories. OEMs can produce a...

What is a Medical Device Contract Manufacturing Services Company?

What is a Medical Device Contract Manufacturing Services Company?

There’s little doubt that the medical device manufacturing industry is expanding worldwide and contract manufacturing services a large part of it. Over the past several decades, the industry, and the contract manufacturing sector has met the challenges of...

Medical Device Validation and Verification Requirements

Medical Device Validation and Verification Requirements

Original Equipment Manufacturers (OEM) of medical devices must perform and pass FDA approved medical device process validation and verification before any product can be introduced on the market. In the medical device industry, process validation and verification is a...

5 Questions for OEM Medical Device Injection Molding

5 Questions for OEM Medical Device Injection Molding

Injection molding is a manufacturing process that produces plastic injection molds from both thermoplastic and thermosetting polymers. Over the past several decades the method has proven to be the most cost-effective and best way for mass production of high-quality...

What’s the Difference Between the FDA Medical Device Classes?

What’s the Difference Between the FDA Medical Device Classes?

All medical devices sold in the United States are regulated by the U.S. Food and Drug Administration (FDA). More specifically, any medical device manufactured, repackaged, relabeled, and/or imported by any company or firm to sell in the U.S. has to meet FDA...

Plastic Products Catalog

BMP Medical is a quality manufacturer of plastic consumables and plastic products for research and medical diagnostic laboratories. Our products are manufactured to the highest quality standards. We offer a wide selection of products sold through the world’s premier laboratory distributors.

Non-Sterile and Sterile Centrifuge Bottles

  • Available with standard caps for low-speed work and sealing caps for high-speed applications
  • Caps have a built-in gripper to facilitate removal from the rotor
  • Extra thick walls for durability-resistant to most chemicals
  • Wide mouth design makes filling and decanting easier
These precision molded centrifuge bottles are available in polycarbonate or polypropylene. For low speed applications the bottles provide excellent value for large volume/large batch centrifugation procedures. For high-speed work, the easy-to-use Noryl® (Noryl® is a registered trademark of General Electric Company) sealing caps with silicone O-rings enable leak-free processing at high centrifugal forces over long durations. Bottles must be filled to 80% of capacity. Centrifuge bottles may be autoclaved at 121ºC at 15 psi for 20 minutes. Caps should be placed on the bottles without engaging the threads. Bottles are qualified to the rated g-forces using Sorvall® (Sorvall® is a registered trademark of Kendro Laboratory Products) and Fiberlite® (Fiberlite® is a registered trademark of Piramoon Technologies Inc.) high-speed rotors, tested at 20ºC, with bottles filled to 80% of capacity. Failure to use the correct rotor cushion or adapter will shorten the life of the bottle and may prevent achievement of the maximum rated RCF and/or bottle failure. Prolonged autoclaving and reuse may cause stress cracks, crazing or bottle discoloration.
centrifuge bottle
Sterile Centrifuge Bottles 
 
centrifuge bottle
Non-sterile Centrifuge Bottles

Cytology Funnels Category

BMP Medical Cytology Funnels for the Shandon CytoSpin® Centrifuge BMP Medical Cytology Funnels are the functional equivalent of the Thermo Shandon CytoFunnel®. Fully compatible with the Shandon CytoSpin Centrifuge, BMP Medical Cytology Funnels can be used to deposit a thin layer of cells in a clearly defined area of a microscope slide. The filter card absorbs any excess fluid. Operation is identical to those supplied by Shandon and easy-to-follow instructions are included in each pack. All products sold in case quantities only.


 

metal cytology funnel clip

Metal Cytology
Funnel Clips

Double Cytology Funnels

Double Cytology Funnels

Single Cytology Funnels

Single Cytology Funnels

Hemodrop Blood Dispenser

The Hemodrop is designed to reduce the risk of exposure to bloodborne pathogens in the Hematology laboratory. To prepare a manual differential smear, a drop of blood needs to be dispensed onto a glass slide from the specimen tube. Simply puncture the rubber stopper with the Hemodrop, and then invert and press gently onto the slide. A single drop of blood will be dispensed and the slide is ready. No more removing the stopper and manually putting a drop on the slide to test blood.  
hemodrop
Hemodrop

Multipurpose Containers

These high-quality non-graduated lab containers are designed for the collection, transport, and storage of specimens and samples. Tight fitting lids prevent leaks and odors. Ideal for storing biologically hazardous samples for terminal autoclaving before disposal. Molded from various materials. The stackable containers are resistant to freezing and boiling.

centrifuge

Translucent Multipurpose
Containers

 

Polypropylene Beakers

Resistant to most commonly used laboratory reagents, including a variety of strong acids, bases, and organic solvents, these high quality polypropylene beakers are the premier choice for scientific laboratory applications. All beakers are transparent for clear content visibility and graduated for easily estimating volumes. Molded-in pouring spouts, and a rolled lip, for a dripless working environment. Autoclavable to 121ºC ( 248ºF).
centrifuge
Polypropylene Beaker

Specimen Collection

For specimen collection and transport, this system provides disposable products for the convenient collection, delivery, and testing of urine specimens. A plastic cup is provided for specimen collection and the pressure sensitive patient identification labels have ample writing space. The lightweight transport rack is small and easy to carry yet provides space for up to 20 tubes with labels and caps. The tubes are made of sturdy polystyrene and are safe for centrifuging. The flared top permits the use of a midget urinometer ensuring a tight cap fit.   
centrifuge
Specimen Collection Kit
   
centrifuge
Commode Specimen Collection Systems
 

Tissue & Ultra Tissue Grinders

We offer two lines of tissue grinders for the clinical lab and research lab. The standard product is all plastic and is designed to grind softer tissues such as liver and spleen. The Ultra tissue grinder line has a vitrified tip and is designed for tougher material such as muscle or bone. Both lines are delivered sterile sealed Tyvek® (Tyvek® is a registered trademark of DuPont) package.

tissue grinder

Tissue Grinders

ultra tissue grinder

Ultra Tissue
Grinders

Urine Sedimentation System

BMP Medical, a manufacturer of diagnostic products, has a full line of urinalysis disposables. We offer the components separately, or in various kit sizes and configurations. The line is built around our 10-chambered Decislide which is made out of optically clear acrylic. It can take 10 individual samples on the same slide eliminating the need for a new slide for each sample.

 

Urine Sedimentation

Urine Sedimentation
System